CCR Medical, Inc. Internet Store Home Health Care Products
Store Categories:
Home Health Care Products
MicroStimItem Photo |
Description |
Price |
Purchase |
 |
See Below | $128.00 |
Information:
The MicroStim is a complete muscle relaxant monitor that fits in the palm of your hand.
Its functions include twitch, tetanus, and automatic train-of-four.
Output current is fully adjustable from 0 to 70 mA.
In additional to the flash of the pulse LED, an audible indicator sounds as each stimulus pulse is
delivered, enabling direct monitoring of the patient's response.
The MicroStim is delivered ready to use: Instruction manual, battery, diagnostic probe, and 6 foot
leads with alligator clips are included.
Modes of Operation:
Standby: A standby switch maintains power to the instrument without generation stimulus pulses.
Twitch: 1 s (1 pulse/s) Tetanus: 100 Hz (200 pulses/s) Train-Of-Four: Single (4 pulses/2 s)
Output Current: Adjustable from 0-70 mA Stimulus Pulse: Square Wave Monophasic pulses (200-us duration)
Indicators: Battery LED (green) indicates that the units on; it flashes when battery voltage is low. Pulse LED (red) flashes and audible indicator sounds each time a stimulus pulse is generated.
Power Source: 9-V alkaline battery (access door on rear panel) Power Consumption: Approximately 15.5 mA
Case: High-impact ABS plastic with Lexan overlay on membrane touch-switches
Size: 1.10" H x 2.42" W x 3.88" D Weight: 5.5 oz., Including battery Warranty: 1 year, parts and labor
MicroStim Plus
Item
Photo |
Description |
Price |
Purchase |
 |
See Below | $145.00 |
Information:
The MicroStim Plus is a complete muscle relaxant monitor that fits in the palm of your hand.
Its functions include twitch, 50 and 100 Hz tetanus, automatic train-of-four, and double-burst stimulation.
Output current is fully adjustable from 0 to 70 mA.
As in the other instruments in the PLUS series, an audible indicator sounds as each stimulus pulse is
delivered, enabling direct monitoring of the patient's response.
The MicroStim PLUS is delivered ready to use: Instruction manual, battery, diagnostic probe, and 6 foot
leads with alligator clips are included.
Modes of Operation:
Double Burst 3,3: 2 60-ms bursts of 50 Hz separated by .75 s.
Twitch: 1 s (1 pulse/s) Tetanus: 50 Hz (50 pulses/s) or 100 Hz (100 pulses/s) Train-Of-Four: Single (4 pulses/2 s)
Output Current: Adjustable from 0-70 mA Stimulus Pulse: Square Wave Monophasic pulses (200-us duration)
Indicators: Battery LED (green) indicates that the units on; it flashes when battery voltage is low. Pulse LED (red) flashes and audible
indicator sounds each time a stimulus pulse is generated.
Power Source: 9-V alkaline battery (access door on rear panel) Power Consumption: Approximately 13.0 mA
Case: High-impact ABS plastic with Lexan overlay on membrane touch-switches
Size: 1.10" H x 2.42" W x 3.88" D Weight: 5.5 oz., Including battery Warranty: 1 year, parts and labor
DigiStim II
Item
Photo |
Description |
Price |
Purchase |
 |
See Below | $490.00 |
Information:
The dual-purpose DigiStim II peripheral nerve stimulator efficiently monitors muscle relaxants and precisely locate nerves in regional anesthesia procedures.
Output current is fully adjustable from 0 to 70 mA.
The amount of current delivered to the patient is displayed in mA on a large, easy-to-read, digital LCD.
Nerves can be located precisely: The low-level output is adjustable in 0.1-mA increments from 0 to 6.0 mA.
In addition to the flash of the pulse LED, an audible indicator sounds as each stimulus pulse is delivered, enabling direct monitoring of the patient's response.
An optional computer interface is available for evoked potential and EMG applications.
The DigiStim II is delivered ready to use: Instruction manual, built-in mounting bracket (pole clamp assembly), battery, and 6 foot leads with alligator clips are included.
Modes of Operation:
Standby: All toggle switches at off (center position) Twitch: 1 s (1 pulse/s); 10 s (1 pulses/10 s)
Tetanus: 50 Hz (50 pulses/s) or 100 Hz (100 pulses/s)
Train-Of-Four: Single (4 pulses/2 s); repeat (4 pulses/2 s; repeats every 10 s)
Output Current: Adjustable from 0-70 mA(HI range) 0-6.0mA (LO range)
Stimulus Pulse: Square Wave Monophasic pulses (200-us duration)
Indicators: Digital LCD shows current delivered to the patient in mA. Battery LED (green) indicates that the unit is on; it flashes when battery voltage is low. Pulse LED (red) flashes and audible indicator sounds each time a stimulus pulse is generated.
Power Source: 9-V alkaline battery (access door on rear panel)
Power Consumption: Approximately 9.6 mA
Case: High-impact ABS plastic with anodized aluminum front and rear panels. Switches and handles are chrome-plated.
Size: 2.5" H x 6.06" W x 6.25" D Weight: 1 lb.,10 oz., Including battery Warranty: 1 year, parts and labor
DigiStim II Plus
Item
Photo |
Description |
Price |
Purchase |
 |
See Below | $536.00 |
Information:
The dual-purpose DigiStim 2 Plus efficiently
monitors muscle relaxants and precisely locates
nerves in regional anesthesia procedures.
The amount of current delivered to the patient is displayed in mA on a large, easy-to-real, digital LCD.
Nerves can be located precisely:
The low-level output is adjustable in 0.1-mA increments from 0 to 6.0 mA.
In addition to the flash of the pulse LED, an audible indicator sounds as each stimulus pulse is delivered, enabling direct monitoring of the patient's response.
The DigiStim 2 Plus is delivered ready to use: Instruction manual, built-in mounting bracket (pole clamp assembly), battery, and 6 foot leads with alligator clips are included.
Modes of Operation:
Standby: All toggle switches at off (center position)
Double Burst 3,3: 2 60-ms bursts of 50 Hz separated
by .75 s; repeats every 10 s
Twitch: 1 s (1 pulse/s); single or repeat Tetanus: 50 Hz (50 pulses/s) or 100 Hz (100 pulses/s)
Train-Of-Four: Single (4 pulses/2 s); repeat (4 pulses/2 s; repeats every 10 s)
Output Current: Adjustable from 0-70 mA (HI range) 0-6.0 mA (LO range)
Stimulus Pulse: Square Wave Monophasic pulses (200-us duration)
Indicators: Digital LCD shows current delivered to the patient in mA. Battery LED (green) indicates that the unit is on; it flashes when the battery voltage is low. Pulse LED (red) flashes and audible indicator sounds each time a stimulus pulse is generated and before the instrument automatically shuts down. The loudness of the beep is adjustable.
Power Source: 9-V alkaline battery (access door on rear panel) Power Consumption: Approximately 2.4 mA
Case: High-impact ABS plastic with anodized aluminum front and rear panels. Switches and handles are chrome-plated.
Size: 2.5" H x 6.06" W x 6.25" D Weight: 1 lb. 10 oz., Including battery Warranty: 1 year, parts and labor
DigiStim III
Item
Photo |
Description |
Price |
Purchase |
 |
See Below | $392.00 |
Information:
The DigiStim III is a full-featured peripheral nerve stimulator in a convenient, hand-held unit.
Membrane touch-switches make the selection of stimulus functions easy.
The amount of current delivered to the patient is displayed in mA on a large, easy-to-real, digital LCD.
Nerves can be located precisely: the low-level output is adjustable in 0.1-mA increments from 0 to 6.0 mA.
In addition to the flash of the pulse LED, an audible indicator sounds as each stimulus pulse is delivered, enabling direct monitoring of the patient's response.
The DigiStim III is delivered ready to use: Instruction manual, battery, and 6 foot leads with alligator clips are included. Mounting bracket optional.
Modes of Operation:
Standby: A standby switch maintains power to the instrument without generating stimulus pulses.
Twitch: 1 s (1 pulse/s); 2 Hz (2 pulses/s); 10 s (1 pulse/10 s)
Tetanus: 50 Hz (50 pulses/s) or 100 Hz (100 pulses/s) Train-Of-Four: 4 pulses/2 s; repeats every 10 s
Output Current: Adjustable from 0-70 mA
Stimulus Pulse: Square Wave Monophasic pulses (200-us duration)
Indicators: Digital LCD shows current delivered to the patient in mA. Battery switch displays battery voltage on LCD. Pulse LED (red) flashes and audible indicator sounds each time a stimulus pulse is generated.
Power Source: 9-V alkaline battery (access door on rear panel)
Power Consumption: Approximately 7.6 mA
Case: High-impact ABS plastic with Lexan overlay on membrane touch-switches
Size: 2.09" H x 3.60" W x 5.75" D Weight: 11 oz., Including battery Warranty: 1 year, parts and labor
Item
Photo |
Description |
Price |
Purchase |
 |
See Below | $462.00 |
Information:
The DigiStim 3 Plus is a full-featured peripheral nerve stimulator in a convenient, hand-held unit.
Membrane touch-switches make the selection of stimulus functions easy.
The amount of current delivered to the patient is displayed in mA on a large, easy-to-real, digital LCD.
Nerves can be located precisely: The low-level output is adjustable in 0.1-mA increments from 0 to 6.0 mA.
In addition to the flash of the pulse LED, an audible indicator sounds as each stimulus pulse is delivered, enabling direct monitoring of the patient's response.
The DigiStim 3 Plus is delivered ready to use: Instruction manual, battery, and 6 foot leads with alligator clips are included. Mounting bracket optional.
Modes of Operation:
Standby: A standby switch maintains power to the instrument without generating stimulus pulses.
Double Burst 3,3: 2 60-ms bursts of 50 Hz separated by .75 s; repeats every 10 s
Twitch: 1 s (1 pulse/s); 2 Hz (2 pulses/s)
Tetanus: 50 Hz (50 pulses/s) or 100 Hz (100 pulses/s)
Train-Of-Four: 4 pulses/2 s; repeats every 10 s
Output Current: Adjustable from 0-70 mA (HI range) 0-6.0mA (LO range)
Stimulus Pulse: Square Wave Monophasic pulses (200-us duration)
Indicators: Digital LCD shows current delivered to the patient in mA. Battery switch displays battery voltage on LCD. Pulse LED (red) flashes and audible indicator sounds each time a stimulus pulse is generated. Audible indicator beeps each time a stimulus pulse is generated and before the instrument automatically shuts down. The loudness of the beep is adjustable.
Power Source: 9-V alkaline battery (access door on rear panel) Power Consumption: Approximately 2.4 mA
Case: High-impact ABS plastic with Lexan overlay on membrane touch-switches
Size: 2.09" H x 3.60" W x 5.75" D Weight: 11 oz., Including battery Warranty: 1 year, parts and labor